AWS WeatherBug Bedienungsanleitung PDF herunterladen (Seite 15)

Digital Display Manual

3.2 Changing Display Units

The Digital Display unit provides the capability to display values in English or

Metric units. Table 2 depicts the measurement units available from the display

unit.

Weather Value English Unit Metric Unit

Temperature

Degrees Fahrenheit (F) Degrees Celsius (C)

Barometric Pressure

Inches of Mercury ("Hg) Millibars (mbar)

Wind Speed

Miles per Hour (mph) Kilometers per Hour (km/h)

Knots (knts)

Precipitation

Inches (in) Centimeters (cm)

Table 2: Available English and Metric Units

There are two circles just to the right of the "Units" button, one of which will be

illuminated, indicating which units are currently being displayed. English units

are the default setting of the Digital Display unit. To toggle between English units

and Metric units press the "Units" button. The indicator light will change as you

press the button.

The Standard English wind speed unit of miles per hour (mph) is factory set at

the time of order. To change the English wind speed units from miles per hour

(mph) to knots or vice versa, you must send the display unit back to WeatherBug

Technical Support via an RMA. Please call WeatherBug Weather Station

Technical Support at 800-624-4205 for assistance.

3.3 Rates of Change

The Weather Station Digital Display unit allows you to view the rates of change of

several weather values, as shown in Table 1. To view the rates of change press

and hold the "Rate" button in the lower left region of the display. Values for rates

which are not available will not be displayed. Releasing the "Rate" button returns

the display to the current conditions mode.

All rate values are expressed in "per hour" format. For example, when the rate

button is pressed and held, the value in the humidity readout box is the rate of

1 2 ... 10 11 12 13 14 15 16 17

Keine Kommentare

AWS WeatherBug Bedienungsanleitung Seite 15